Manufacturers explain why the saline injection machine tripped
Release time: 2019/10/29 9:23:17
The manufacturer explains the reason why the saline injection machine trips. For the saline injection machine in our use, it will produce various common phenomena. How can we solve it? Let ’s take a look at the common faults and The corresponding solution.
(1) The power cable is connected incorrectly
(2) Phase loss.
(3) 2F8 trip (input signal power), short circuit of proximity switch or liquid level switch.
The suggested method is as follows:
(1) The two phases of the power supply can be changed. It is very important that the 12N1 indicator light must be on when the system is first started.
(2) Check whether all three phases have voltage.
(3) Check if the control relay 12N1 works. If 12N1 is normal, the indicator on it is on; otherwise, replace the control relay.
The above is the reason the manufacturer explained to everyone about the trip of the saline injection machine and the corresponding troubleshooting methods. If you still have any questions, you can log in to our official website to inquire, or call our staff directly, our staff will answer your questions one by one.